Pre-Soak your vehicles with a thick layer of snow foam concentrate to soften dirt and help lift debris. Pre-soaking minimises the risk of scratching your paintwork by reducing the road grime before any physical touching of the paint occurs.
- The Refract Pre-soak Snow Foam Cannon is designed to be used with a pressure washer and injects a metered amount of shampoo or dedicated snow foam concentrate into the aeration manifold which creates a variable consistency of foam.
- The Pre-soak cannon is new design which allows the user to easily add water and concentrate to the 800ml reservoir without falling or over-flowing.
- The high quality brass manifold incorporates a variable adjustment knob to control foam consistency and the front spray nozzle can be twisted to adjust spray width!
- The Cannon sucks the concentrate from within the reservoir and is then aerated with the aid of the flow from your pressure washer.
The Presoak Snow Foam Cannon comes complete with your choice of adaptor to suit most models of pressure washer and includes a full set of spare rubber O-rings if damage was to occur. Ebay orders to include required adaptor in notes.
- Simply fill the reservoir with water and then add 60-100mls of Ph Neutral Washing Shampoo or Snow Foam Concentrate.
- Replace Heady Duty Screw Top lid and shake!
- Pull the trigger of your pressure washer and adjust the flow ratio and front pattern nozzle and start pre-soaking.
- Start from the bottom of the vehicle and work your way upwards until the entire vehicle is covered.
- Allow to dwell for a few minutes and dont allow to dry as streaks may appear.
- The last step is to rinse off the foam and lifted debris and continue to the 3 bucket washing method!
- 1 x Quick Connect Adaptor
- 1 x Choice of Specific Pressure Washer Adaptor (BOSCH, GERNI, KARCHER)
- Ebay orders to include required adaptor in notes
- 1 x Refract Pre-Soak Snow Foam Cannon manifold
- 1 x 800ml reservoir bottle
- 1 x PVC suction tube
- 1 x Spare o-ring rebuilt kit pack
- Instruction manual
- Bosch - RCC-SFCB
- Gerni - RCC-SFCG
- Karcher - RCC-SFCK
Bosch AQT/AR Blue Clean adapter fits:
- Bosch AQT
- AR Blue Clean
- Typhoon models up to TE2400.
- Michelin models up to MPX160.
- Electric Ryobi
- Jet-USA (or you can use M22 female or 1/4" QC or Kew/Alto depending on where along the wand you want the snow foam cannon to be attached).
- Newer Aldi Workzones models.
- Black & Decker
- Sun Joe
Gerni adapter fits:
- All Gerni models
- Most electric Husqvarna, Stihl and Ozito
Karcher K adapter fits
- K series K2 - K7 models