5" Dual Action Polisher - Non Stall Gear Driven - 15mm Orbit

Refract Positive-Forced Drive Dual Action Machine Polisher - 15mm Orbit

What is a Forced-Action Driven Polisher?

Our forced-action Polishers (in 3" & 5/6" size) are similar to a Dual-Action Polisher (free-spinning) which has an off-center-mass counter weight! However it rotates counter-clockwise & wont stall! 

This weight orbits & rotates around a spline when power is applied & gravity takes over!  However due to varying loads, pressure & gravity tends to induce a pad & backing-plate stall scenario unless you've got it completely flat & without an off-center resistance.... (ceasing nearly all polishing power..) and its quite frustrating...

Forced-Action has another set of gears which physically drives that counter weighted mass around an internal toothed carousel thus eliminating any stalling & allows consistent polishing.

With the safety of still being Dual-Actioned but now with the cutting power of a rotary polisher but leaving no holograms like a normal rotary would.. Basically it's a rotary powered scalpel with the safety of Dual Action

The aggression and power of these machines whilst being incredibly easy to use has to be experienced by all DIY & pro detailer. The useability, simplicity, sound, power & results are astonishing!

Whether you're a seasoned Pro or DIY enthusiast then these Refract Forced Action Polishers are your new best friend! 

Introducing the new era of Dual Action Polishing for Professional results with minimal effort & experience.

The new Refract Mini 3" & (5/6") Forced-Driven, Positive Dual Action Polishers.

With the safety of Dual Action & the cutting power of a rotary polisher then you will never have to worry about burning through paint, inducing holograms or experiencing polisher-stall ever again! 

Comfortable rubber grip heads & spine braces for a non-tipping placement.

Smooth but vicious sounding positive driven gears & tight tooth engagement & very low vibrations. 

Cut (pardon the pun) your paint correction time & exhaustion levels in half by reducing the amount of cutting power lost from traditional Dual Action Polisher Stall &  Reduce physical arm & body fatigue by allowing the power of A gear-driven forced action machine do more of the work!

Available in Mini 3" 

5"+6", Full Sized Forced-Dual Action 

2 x interchangeable sized backing plates. (R04645)

New Ball-Swivel Cable-Tail Gland for increased comfort & reduced cable failures from stretching on Full Sized Model. 

Power-lock button 

Casings, gears & components made from some of the most well-know and respected quality tooling manufacturers.

Assembled with strict quality control & tested to meet & exceed International Trade Tool ISO Standards. 

Any spare/replacement parts, warranty repairs etc conducted locally in Perth or sent out via post. Machines are not sent away for months on end to have returned or repaired.

Machine Specs:

5/6" (125/160mm) Full Sized Forced Action Machine 

1 x 5" Backing Plate Installed

1 x 6" Backing Plate Included.

Ball-Swivel Power Cable Tail-Gland 

15mm Orbit 

240v/60hz, 1200 watt

Weight 2.6 kgs

3200-9600 OPM. (Not a misprint)

4m Power Cable

Radial 11-Speed Positive-Click Speed Controller Dial (Clicks 1-6, Half-Speed Incremental. 3200-9600 OPM)

Kits Include:

2 x Spare Carbon Brushes

1 x Side or Top-mount handle Grips

1 x Refract Tool Pouch

Tools & Maintenance Accessories 

Instruction & Usage Guide 

12 Month Manufacturing Warranty

Perfectly Matched with our new Refract Infinity Compound Range for jaw dropping fast corrections, gloss & results.