Refract X-Glass - Bore Water Stain & Heavy Scale Spot Remover Kit
Refract X-Glass - Bore Water Stain & Heavy Scale Spot Remover Kit
Refract X-Glass - Bore Water Stain & Heavy Scale Spot Remover Kit
Our patent X-Glass Kit removes hard mineral scale, spotting & bore water staining on glass, by hand, in seconds.
Refract Patent Formula & Guaranteed to work!
Non scratching, non abrasive. DIY & Pro Detailer friendly.
One 200g tub of Refract X-Glass will treat approx. 8-10 (or more if used sparingly) full-windowed sedan type vehicles.
This particular vehicle is a 2014 Security Vehicle with 360 thousand kms on the clock..
- Has never been undercover & is constantly bombarded with every bore sprinkler & hard-core environmental element you can throw at it!!!!
Normally, to remove this heavy staining (which you can literally feel & hear) would take hours to remove with a Rotary Polisher & Extremely Hard Fiberglass Pad.
This rear door window took approx. 3 minutes from whoa to go.
From a completely destroyed & probably close-to-being not safe to full clarity in only a few short moments.
Easy Diy, no machine polishing, electrical tools or dangerous acids... all done by hand with slight rubbing.
Paste Formula, Non Acidic, Non-burning & very simple to use with the included scrub pad.
Your bathroom shower screens & ceramic tiles will look absolutely stunning btw too..
Cleans and removes industrial pollution, Japanese acid rain, thick mineral formation & hard-set lime coagulation & not to mention the dirtiest & filthiest brown bore water staining you can give it....💩
One 200g tub of Refract X-Glass will treat approx. 8-10 full-windowed vehicles.
⚠️ Caution using abrasive scrub pad on some side mirrors as scratching may be induced (as they are actually reflective plastic & not glass).
Can be used on painted & piano black plastics however DO NOT USE the abrasive-side of the applicator! Soft-Microfiber side only!
Refract X-Glass can be also used effectively on glass shower screens, porcelain tiles & mirrors.
Safe to use on vehicle-wrapped matte-vinyl or matte-painted surfaces with the abrasive scrub pad however always test & check carefully for scratching in an inconspicuous area first!
Directions for use:
- Wash glass with hot soapy dishwashing detergent & water to remove surface grease.
- Tape-off any surrounding high gloss or surrounding surfaces to avoid scratching
- Spray or Drip a tiny amount of water onto the white-abrasive side of the supplied applicator & scrape a small 5 cent sized of white cleaning paste from the tub with the applicator.
- Start by lightly covering the affected area with a smearing of paste & start massaging with a medium-firm circular or hash-tag motion.
- lightly spritz more water if paste starts to dry.
- Wipe off the area with a damp microfiber waffle towel (Included) & repeat process if required.
- Wash or pressure-wash the glass to remove any traces of paste haze.
Aftercare:
Protecting your newly cleaned glass & surfaces from further exposure to bore-water & environmental conditions that cause spotting is a vital necessity.
Once your glass & surfaces are free from staining & spots we strongly recommend Refract Pro Strength "Glass" cleaner kit & Refract "Pro-Glass" protection kit immediately after spot removal.
This will not only give you Chrystal-clear glass but it will provide huge hydrophobic properties & stop bore & water spotting from reoccurring.
Keep on top of your glass-care maintenance by cleaning your glass every wash with Refract "Glass" cleaner but also by reapplying Refract Pro-Glass Protective Coating every 6-12 months..
Size: 200g
White Non Abrasive Paste
Non Toxic
Wear Gloves & avoid exposure to skin as drying may occur.
No Trade Pricing for this product.
Made from German & Japanese Ingredients
Blended at Refract Laboratories LLP Sdn Bhd Kuala Lumpur, Malaysia
Bottled & Labelled in Perth, Western Australia